Enamel drying accelerator 25 ml

It is used for domestic alkyd (PF, GF) enamels, paints, primers, putties, varnishes, natural drying oil and paints, putties based on it. The accelerator noticeably reduces the drying time of poor quality materials and does not spoil high-quality material. Dosage: per 1 kg of enamel, primer, putty 45 drops (4.5 ml) on 1 kg of varnish, drying oil 90 drops (9 ml). Drying time: Usually 18-24 hours at a temperature of 20 ° C, but it is possible to determine how the material will dry, only with a test color. Recommendations for use: Before painting, the paintwork material should be thoroughly mixed, filtered out the required amount into a separate container, add an accelerator and mix. To paint as usual. If the material dries very slowly, the amount of accelerator can be increased, but not more than 1.5 times. After the addition of an accelerator, materials may show an increased tendency to form films during storage, therefore they should be stored in a tightly closed container for no more than one month. Packing: 25 ml. TU 2331-009-47956390-99 Sanitary and epidemiological conclusion No. 34.77.03.231.P.004014.09.06 of September 19, 2006