Sealant Abris VS-LB

Sealant in the form of a self-adhesive tape of rectangular cross-section, which is covered on both sides with anti-adhesive material. Application area: - waterproofing joints and joints of underground structures (concrete, metal, etc.) exposed to the hydrostatic pressure of water; - waterproofing of places of passage of engineering communications: constructional seam between the base plate and the wall; wall and ceiling; working seam in the base plate. Color: red. Form of production: tape. Self-adhesive waterproofing tape is designed for waterproofing joints and joints of underground structures (concrete, metal, etc.) exposed to the hydrostatic pressure of water; places of passage of engineering communications. Material: A sealant in the form of a self-adhesive waterproofing tape, which is coated on both sides with anti-adhesive material. The main geometric dimensions of the tape: width (mm) × thickness (mm) (10 ÷ 25) x (5 ÷ 20) Operation temperature from minus 60 ° С to plus 140 ° С Bonding strength with concrete at separation, MPa, not less than 0.10 Swelling in water after 5 h,%, not less than 100 after 24 h,%, not less than 200 Mode of application: Works on sealing the seams of concrete structures are not recommended at ambient temperatures below -20 ° C, in rain, snow and fog. When the outdoor air temperature is below + 5 ° C, work can only be carried out after holding the sealant for 24 hours at a temperature not lower than + 15 ° C. Before installation, the anti-adhesive coating is removed from the BC Abris tape-like material. The tape is installed on a concrete surface tightly, without gaps and is joined to each other end-to-end. Before applying the material Outline Sun, the surface of the concrete is cleaned of dirt, ice. Installation of a tape on a damp surface is allowed. Standing water must be removed from the surface before work is performed.