Sealant Abris S-Ltd

Sealant in the form of a self-adhesive tape based on a non-woven fabric with two mounting butyl strips along the edges. On the one hand, the material does not pass moisture, on the other hand, it helps to filter the steam. Application area: - external sealing of adjunctions of window and door blocks to the wall aperture; -protection of the insulation layer. Color: according to customer request. Moistureproof "breathing" tape of diffusion type is used for external sealing of the joints (along the perimeter) when mounting translucent structures and door blocks. Material Strong diffusion tape of polypropylene fabric with two self-adhesive mounting strips based on butyl rubber, applied on one side. Main geometrical dimensions: Width (m) × thickness (mm) (50 ÷ 250) × 1.5 Application temperature not lower than -20 ° С Operating temperature from -60 ° С to + 140 ° С Water absorption,%, 24h, not more than 0.30 Bonding strength with metal during peeling, N / m, not less than 400 Bonding strength with concrete at separation, MPa, not less than 0.1 Flow resistance at 70 ° С, mm, not more than 2.0 Store in original packaging in a dry place, avoid direct sunlight. Shelf life - 24 months. Mode of application: Before applying the sealant, the working surface must be prepared - dried, cleaned of dirt and dust, and in the winter from frost. Remove peeling outer rust and corrosion from the rusty surface. It is necessary to remove the anti-adhesive coating from the tape, apply the tape with a sealing side on the working surface, press tightly or roll it with a roller through a reinforcing coating. Sealing works are not recommended to be carried out at an ambient temperature below -20 ° C, in rain or snow. When working with a sealant does not require special protective equipment for workers.